This page has been set up to keep our sponsors and the public upto date on the progress and results of our Promod class Buggy.
Firstly we must thank the support of our Sponsors. BF-GOODRIC. WIRED BY VANCE.
Okay A little about the vehicle.
The chassis is an OVERKILL ENG Promod class chassis, Driveline consists of a Mazda 13 turbo Rotary engine, Jatco automatic gearbox (soon to be replaced by a ford c4 auto) , rover lt230 transfer case with MAXI-DRIVE 5.0;1 gears.The centre diff has been modified to allow us to select rear drive only in low range allowing for rear burns. We have also fitted an OVERKILL ENG rear disconnect which allows us to do front digs. Diffs are 60 series landcruiser, the front one has been extensively modified with the pumpkin offset by 110mm to the right hand side to allowing for clearancing,The internals consist of an ARB air locker,DOBBIN ENGINEERING axles and LONGFIELD 30 spline cv,s all of which has proven to be very reliable so far. The rear Diff runs a Welded centre and a set of DOBBIN ENGINEERING axles as well as an OVERKILL ENG disc brake conversion. Suspension consists of three links setups front and rear using WALKER EVANS 14 inch travel air shocks. Steering is a full hydro setup using a DOBBIN ENGINEERING double ended ram.Wheels and tyres are 17/8 inch steel rim running OVERKILL ENG beadlocks and 37 inch red label tyres from BF-GOODRICH. All wiring and switches were done by Micheal Vance, Paint was done by Bruno.
